Marantz and a turntable

The back panel will now come off, but be careful because the plastic piece is connected on the inside by a few wires that are glued in place. You can move the back panel from side to side or spin it vertically to give yourself room to work. Get those speaker wires The inside of the Crosley is fairly empty, so you can see all the way to the speakers at the far end. Just reach in with a pair of scissors and carefully snip each of the 2 wires connected to each speaker. One pair should be red and black and one pair should be white and black. Gently grab the four wires from here so you can pull them through the bundle of wires in the center and out the back of the unit to work with. Attach the line-out converter Carefully strip the end of the four speaker wires.

turntable hook up

RedJohn You may have connected the ground wire from the turntable to the amplifier chassis, but have you checked the other end? The ground wire inside the turntable chassis may have come loose or, worse, never been connected properly. You need to ensure the grounds inside the turntable are properly attached to the ground wire.

Next, on the top right is a phono input that allows you to connect a turntable to a home theater receiver. However, this option is now only available on some higher-end home theater receivers, but even a growing number of high-end home theater receivers are eliminating this connection option.

The on screen display combines clear text and easy to understand graphics — making setup a breeze and provides easy day-to-day operation. Product Feature Highlightsl 5 Channel discrete amplification Maximum power: The speaker connections on the rear panel are color-coded for quick and easy connection, and the supplied color-coded speaker cable labels ensure correct hookup the very first time. The easy to use remote control features discrete source selection buttons that let you choose your preferred source with the touch of one button no need to toggle through all the inputs to get to your preferred source component.

Rated at a maximum of watts for each of the 5 channels, the AVR-E provides high power and wide dynamic range with low distortion for a superb surround sound listening experience. Wide Range of Speaker Compatibility With the AVR-E , you can connect and enjoy just about any combination of speaker sizes and types, thanks to the variable crossover points which allow mixing and matching of differing speakers.

You can connect compact speakers, standard-size speakers, even full size speakers as well as a subwoofer and optimize the settings for each type, based on their characteristics. Warranty Information The AVR-E is backed by a two-year limited warranty one-year warranty on Refurbished model , subject to the full warranty terms and conditions. Dimensions The receiver measures 6 x

Vintage Receiver Turntable

However, if you are more of the analog type, you are probably going to want to have a record player set up properly in order to play all of your vinyl records. Setting up a record player is a simple task and requires only a few easy-to-follow steps. Doing so will help enhance your record-listening experience, and it can look a little more classy than your average CD player.

Connect your record player to your phono preamp, which is used to boost the signal of a record player. Using an audio RCA cable, connect the corresponding red and white ends to the audio outputs on your turntable and then use the other end of the cable to connect to the audio inputs on your phono preamps phono channel. Connect your phono preamp to your stereo receiver.

Jun 05,  · I recently acquired a DBX to run my turntable through as Dave Mallette suggested sometime back in another thread. I have a NAD receiver with no phono input, so I am using a NAD Phono Preamp separately.

Use Correctly for Best Results. Better built than consumer-grade USB turntables. Plus features to bring out the inner DJ in you. You may not be a DJ but there’s a good chance you care about sound quality. You’ll find the best built and best sounding turntables with a digital output in the DJ category. Keep this in mind: A DJ turntable is a musical instrument first and a record player second.

Harman Kardon HKi Receiver, Two Channel

Plus the front panel USB port is ready for the newest sources for music: The VSX K also features Pioneer’s exclusive Multi-Channel Acoustic Calibration system MCACC , providing an optimized multi-channel listening experience by measuring every speaker’s connection, noting its size and distance from the listening point, sound levels and timbre in order to calibrate, customize and maximize performance specifically for your room. With the unique Front Stage Surround Advance feature, you experience a virtual surround sound environment.

By filling in areas where minute details were left out during the compression process, even audio like WMA, MP3 and AAC is enhanced with another Pioneer exclusive, Advanced Sound Retriever, letting you enjoy near CD quality sound from compressed music sources. There’s also an Auto Level Control, equalizing volume differences between portable audio tracks or television programming and eliminating jarring volume changes.

Which means the only thing that shocks you is how good it sounds.

The Neo ACE is A Complete Experience of musical ecstasy. Simply hook up a pair of speakers, connect to the internet and you are ready for music, lots of music.

First thing is if your surround sound receiver does not have a phono input with built in phonostage as many newer receivers do not to cut down on costs then you will need a external phono preamp. This first boosts the level of the low level signal from the cartridge and then re-equalizes the recorded music from the vinyl back to a flat response. Records are recorded with bass frequency’s lowered in volume and high frequency’s boosted. The RIAA equalization in the phono preamp re-equalizes the recorded sound on the record back to a flat response.

You must also match the phono cartridge to the turntables tonearm, and the cartridge to the phono preamp. First the cartridge must match the tonearms lateral mass. This is kinda like matching shocks to a car, light car needs shocks that are less stiff, and heavy car needs stiff shocks, for the cars to ride right and stay on the road. The reason for this is in order for the cartridge to track properly in the groves you want the cartridge to be staple in the grove and not mis-track.

Really poorly matching combinations can even cause the cartridge to jump out of the grove or completely mis-track causing bad distortion. Proper tracking force and antiscating must also be set properly, so ether someone that knows how to setup turntables or you take the time to get the right information and tools is required.

How to set up your AV receiver and get the best sound

The original goal of this project was to recreate a stereo system similar to the one I owned in college in the early 70’s and later sold when I needed the money after college. Visually, these systems were way superior to the black front, digital read-out systems of today. And these systems were loud – designed to play rock music of the era. Why Is Vintage Stereo Collectible? Marantz – before restoration Marantz Receiver circa with 70 watts per channel.

Job at any turntable for almost 4 determining the music, but it to going to setup: fisher ser mc receiver for the turntable. Noticeably thicker than phono pre-amp is the software up-gradation. Because lg likes laughing at all comes to know before hitting your computer hookup diagram bose wave music system with a preamp.

If that is you and you are reading this, then stop. To you, the answer is: Only if you want one. The added complexity is evident every time you try to tell someone else how to watch TV: Why does simply watching TV have to be that complicated? The only true way to simplify the experience — and increase the reliability of universal remotes — is to reduce the number of overall components. For example, a lot of receivers now come with Apps built-in Pandora, Netflix, etc.

Sounds great, except chances are you have those same apps also in a different component. So why would you want one?

How to Connect a Turntable to a Home Theater Receiver

Also available are ports for optional devices offering advanced iPod connectivity and XM Satellite Radio. Right there, the Denon already has more going for it than most. The rather large LCD screen provides the consumer with all necessary information, from surround sound settings to set-up assistance.

Feb 07,  · Well, I have a semi-old turntable and I want to connect it to my receiver. I know to connect the rca stereo plugs into my AUX input, but what about the ground wire? On some old Sansui receiver I have, theres a special connection to input the ground wire, but on my Yamaha, there isn’t.

Whether you’ve inherited your father’s vinyl collection or you’re an audiophile that just prefers the sound quality of records, chances are you’ll need a good phono preamp to connect your turntable to your modern stereo system. If you’re planning on hooking up your turntable to a stereo receiver, you’re going to want this preamp to get the high sound quality that you expect from vinyl. Do I Really Need It? Most likely, you do. The majority of newer stereo receivers lack a phono input, which would directly connect them to the turntable.

You’ll need the preamp to connect to the phono output of the turntable and the line input of the receiver. And even newer turntables that may feature a built-in preamp probably aren’t going to give you the highest quality sound that could be achieved from an external preamp. Quick, Easy Setup You don’t need to be a sound engineer or techie to understand this preamp’s setup process. It takes only a minute to power up the preamp with it’s included 12 Volt DC Adapter.

AT

Cassette decks are still available, and most stereo receivers provide an input to connect them, along with inputs for the other audio and video components that may comprise a home theater system. However, that input will be more clearly labeled on some receivers than others. With some models, this input may simply be labeled “Tape” or “Audio 1,” but with newer, video-oriented receivers you may need to use a composite input designated for an analog video source, such as a VCR, labeled “Video 1” or something similar.

The input for a CD player may be used as well; select the input based on availability and which other devices you wish to connect. Connect a set of composite cables from the the “Out” jack on the rear of the cassette deck to the “In” jack of the chosen audio input on the receiver, matching the white and red cable connectors to their proper color-coded connection ports. Connect another set of composite cables from the “In” jack of the cassette deck to the “Out” jack of the chosen audio input, in cases where both sets are offered for that input.

Audio Technica ATLP60 Fully Automatic Stereo Belt Drive Turntable – Silver. Shop all Audio-Technica. About this item. After reading many reviews I decided to purchase this turntable. It was very easy to set up right out of the box. I was able to hook it up to my 25 year old receiver in about 5 seconds. My receiver and speakers are a perfect.

Nov 29, On the back of your sc37, you will see a portion labelled “pre-out”. The white ones are for the left channels,the red for the right channels. Your xpa-5 can power any 5 channels of your choosing. Your sc37 does not have balanced outs so you will have to use the RCA inputs on the xpa Unless you have another amp you plan to use for the fronts, I suggest you hook up and RCA cable from the front right and front left of your sc37 to 2 of the xpa-5’s inputs,then do the same for the center and the surround outputs.

Let the sc37 power the others. And,of course, hook the appropriate channels from the xpa-5 to the appropriate speakers. Mark Ok I think I know what your saying.

Can i connect a turntable to my surround sound system : vinyl

Optical audio cables are a great option for any home theater or audio system. These cords use light to transmit the audio signals from the audio source to the receiver, and because of this, they are not affected by any electrical interference. Optical audio cables, also commonly referred to as Toslink cables, are especially recommended for old homes where there are more chances of electrical leaks due to the accumulation of moisture.

Optical audio cables also provide far superior audio quality as compared to standard coaxial cables. However, these pieces of equipment are not the cheapest ones on the market, so there are a couple of things that you should keep in mind when connecting an optical audio cable to your receiver. Select the Right Format This is the most important step.

Feb 10,  · Connect equalizer input to receiver pre-out, and equalizer output to receiver main in. Re: How to connect Turntable, Tape Deck & Equalizer to a.

Sponsored post – log in to remove this ad. One vintage Yamaha P turntable. The turntable arm lifts, returns and shuts off the turntable after the record is finished playing. This is a very convenient feature! This turntable delivers clean, clear, accurate, and detailed sound. This unit has a built in strobe and adjustable speeds to insure exact speeds. The speeds can be easily adjusted faster or slower. The tonearm is well engineered with adjustable tracking weight and anti skate adjustments.

This tonearm can track even warped records with ease.

My vintage turntable and receiver. VINYL COMMUNITY